Réglages pour une Caterham R300

Location Washers Torque Setting

Front Suspension (Engine In / On Wheels)

Lower wishbone front Spring and plain 82 Nm
Lower wishbone rear Plain spacers 82 Nm
Upper wishbone front N/A 41 Nm
Upper wishbone rear N/A 41 Nm

Front Suspension (Set Prior To Loading)

Front stub axle NA (nyloc nut) 82 Nm
Spring damper top to chassis Spring and plain 20 Nm
Spring damper to lower wishbone N/A but loctite on thread
Upright top ball joint None 48 Nm
Upright bottom Spacer (widetrack only) 61 Nm
Front anti-roll bar clamps Spring under bolt head 20 Nm

Steering

Steering rack clamps Plain under bolt head 11 Nm
Steering column universal joint N/A 20 Nm
Steering column clamp Plain under bolt head 14 Nm
Track rod end to upright N/A 34 Nm

Drivetrain

Upper differential mounting Plain under bolt head and nut 55 Nm
Lower differential mounting Plain under bolt head 55 Nm
Propshaft N/A 58 Nm
Gearbox to bell-housing Spring under bolt head 61 Nm
Gearbox mount Spring under bolt head 61 Nm
Gearbox mount to chassis Plain between chassis and nut 20 Nm
Engine to bell-housing Spring under bolt head also plain and spring 61 Nm
Bell-housing to sump N/A 34 Nm

Engine etc

Starter motor Spring under bolt head and nut 34 Nm